Titanium Grade 2 Forged Fittings Stockists in India

Titanium Gr 1 Flanges are made with the different sorts of focal points like circumstances, finish, end, surface, length, width, thickness, application types, structures, pressure, grade, point, shape, and size in addition. These titanium spines are worked with the mix of the different compound affiliations like titanium, iron, hydrogen, nitrogen, oxygen, aluminum, and vanadium. These fabricated substances offer high strength and hardness to the spines.

These ribs are accessible in various sorts like ERW, solid, made, EFW, and welded. These ribs are organized with different properties so the spines can be impervious to the whole breaking down and rust in the savage circumstances. These properties are warm conductivity, adaptability, and yield strength, silly rigidity, and electrical resistivity, modulus of progress, insistence stress, electrical conductivity, liquefying point, expanding, and thickness as well.

Titanium Gr 1 Flanges is pertinent in gigantic amounts of the general works and associations like gas pipeline, paper industry, pound industry, around the sea oil entering industry, fundamental line, food managing industry, power plant, creation industry, water supply frameworks, heat exchanger, petrochemical industry, drug industry, plumbing, condensers, and prescription industry as well.

Titanium Gr 1 Flanges is made with the top notch of the customary substance for the hardness of the spines and obliging in the savage conditions with near no going to the ribs. These ribs are safeguarded from the whole wide usage like strain breaking deterioration, cleft crumbling, pitting use, and effect breaking down besides. These ribs are phenomenally expected for use in the chemi8cal managing industry and for electrical purposes. These spines are reasonable the most referencing ribs in the market in light of the possibility of these ribs.

Specification of Titanium Gr 1 Flanges

Titanium Flanges Specification : ASTM B363 / ASME SB363
Dimension Standard : ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc.
Standard : ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc.
Size : 1/2″ (15 NB) to 48″ (1200NB)
Class / Pressure : 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc.
Flange Face Type : Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)
DIN Flanges : DIN 2527, 2566, 2573, 2576, 2641,2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637,2638, 2673.
JIS Flanges : JIS B2220 5K, JIS B2220 10K, JIS B2220 16K, JIS B2220 20K
BS Flanges : BS4504 PN 6, BS 4504 PN 10, BS4504 PN 16, BS4504 PN 25, BS4504 PN 40, BS 4504 PN 64, BS 4504 PN 100, BS 4504 PN 160, BS 4504 PN 250, BS 10, BS Table D, BS Table E, BS Table F, BS Table H.

Chemical Composition of Titanium Gr 1 Flanges

C Fe H N O Ti
0.1 0.2 0.015 0.03 0.18 99.5

Mechanical Properties Of Titanium Gr 1 Flanges

Grade Tensile (ksi) Yield Strength (ksi) Elongation %
Titanium Gr 1 240 170 24

Physical Properties of Titanium Gr 1 Flanges


Physical Properties Metric English
Density 4.51 g/cc 0.163 lb/in³


Leave a Reply

Your email address will not be published. Required fields are marked *